Simple Async HTTP Request library, supporting GET, POST, PUT, PATCH, DELETE and HEAD, on top of AsyncTCP libraries, such as AsyncTCP, ESPAsyncTCP, AsyncTCP_STM32, etc.. for ESP32 (including ESP32_S2, ESP32_S3 and ESP32_C3), WT32_ETH01 (ESP32 + LAN8720), ESP8266 (WiFi or W5x00) and currently STM32 with built-in LAN8742A Ethernet.

Embedded rust support for the Wiznet W5500 SPI internet offload chip

Simple Ethernet library for AVR, AVR Dx, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52 and RASPBERRY_PI_PICO boards using Ethernet shields W5100, W5200, W5500, W5100S, W6100. With this library you can use the Arduino Ethernet (shield or board) to connect to Internet to provides both Client and server functionalities.

Connecting ESP32 to W5500 using micropython

GUI Configuration tool for WIZnet serial to ethernet devices.

Add W5500 & W5100S Ethernet to Raspberry Pi Pico - CircuitPython

Standard peripherals library for the W7500x

STM32 library for interfacing with the WIZnet W5500 Ethernet controller. Enable seamless network connectivity with robust support for both static and dynamic IP configurations using DHCP.

ESP32 Wi-Fi, Ethernet, and 4G/LTE Network Router

Command line configuration & Test Tool for WIZnet Serial to Ethernet devices.

arm Mbed-OS 5 WIZnet chipset driver (W7xxx, W5/6xxx)

Termostat postavený na platforme Arduino s Ethernet shieldom Wiznet W5100 / modulom Wiznet W5500. Využíva teplotný senzor DS18B20 na OneWire zbernici. Arduino riadi výstup - relé na základe rozdielu cieľovej a nameranej teploty so zohľadnením hysterézy. Thermostat built on the Arduino platform with Ethernet shield Wiznet W5100 / module Wiznet W5500. It uses the DS18B20 temperature sensor on the OneWire bus. The Arduino controls the output-relay based on the difference between the target and measured temperature, taking into account the hysteresis.

Library for configuring/auto(re)connecting W5100/W5200/W5500, ENC28J60 and built-in LAN8742A / LAN8720 Ethernet at runtime using Config Portal. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. DoubleDetectDetector is used to force Config Portal opening even if the Credentials are still valid. Ethernet_Generic library is used as default for W5x00

Wiznet w5300 driver code, powered by SystemVerilog

Web interface & API for an RS-232 controlled device (a Sharp AQUOS TV) running on a WIZnet W5100S-EVB-Pico

ESPHome components to use WIZnet W5500-EVB-Pico over ethernet

Low level rust driver for the Wiznet W5500 internet offload chip

Tinkering with WizNet W5500 Ethernet Chip using an STM32F030R8 Nucleo Board

WizBot is a Discord chatbot based off Nadeko created by Kwoth & modified by Wizkiller96

WIZnet W7500: development platform for PlatformIO

This project is NTP application using the W6100EVB

Home MQTT ethernet controller using mbed os

Vallox MUH Ilmava home ventilation machine Arduino temperature and humidity sensing hacks to plot recorded data with Apache Superset. Can determine if Sauna is used, when food is cooked, does MUH heating element still work, what outside temperature actually is and all about humidity.

IoT cihazıyla renk ve mesafe bilgileri toplama

REST API running on a microchip.

OpenProject Remote I/O based on W7500

FTP Client Application using W6100-EVB

Uthernet II / Wiznet W5100 Snooper

Library is made for various Open Source Hardware Platform and support WIZnet's W5500 chip

This repository provides an implementation for connecting an STM32G0 microcontroller to a network using the Wiznet W5500 Ethernet module and obtaining an IP address via DHCP (Dynamic Host Configuration Protocol).