A driver for ublox gps

Extended Kalman Filter predicts the GNSS measurement based on IMU measurement

Arduino library for the fastest and simplest communication with u-blox GPS modules

Arduino and CMake library for communicating with uBlox GPS receivers.

A GPS setup to log your track lap times, based on ESP32, with the ability to interface with several mobile phone apps that log your speed and position via Bluetooth Low Energy, Bluetooth or WiFi

STM32 library with DMA support for u-blox devices supporting Global Navigation Satellite Systems and UBX standard. Successfully tested on: NEO-M8, MAX-M8, NEO-M9N

ROS2 drivers for U-blox ZED F9P

u-blox GNSS receiver library light weight for low power tracking application

Software for a Raspberry Pi based muon detector system of the MuonPi project.

A basic NMEA GPS parser designed and tested with the u-Blox MAX-8 series of GPS receiver connected to a Raspberry Pi.

An Orange Pi Zero GPS disciplined NTP server, with an SPI TFT display.

GPS Based Arduino laptimer library

node.js driver for ublox gps

Naima is a autonomous vehicle developed using ROS 2, featuring the Nav2 stack, Map Server, Ublox GPS, and the ZED2 stereo camera. All components are integrated into a complete real-world autonomous driving system focused on perception, localization, and navigation.

Location Tracking Application on SAMR34 using a UBLOX GPS Module (LEA-6S)

Converter of official QZSS (GPS) Almanac files to u-blox 8 / M8 protocol UBX-MGA almanac messages

Python library for parsing SPARTN protocol messages.

Simulator of u-blox 6 serial communication protocol (UBX)

Ublox Linux Library

eCAL interface to the linux gps service daemon

An Arduino-based GPS tracking solution. Uses one Arduino as the GPS tracker and the other to display the GPS location.

Embedded library for M8 family GPS modules

Ublox GPS I2C async library for mbed

GPS-Tracking-System Ublox NEO-7M (GPS) and NodeMcu

VehicleGPS is a program written in Python for the Raspberry Pi, that communicates with an u-blox GPS chip, communicates with a car via OBD-II and displays the data on screen.

Software, electronics (input devices) and mechanical accessories for using a phone as karting logger and display

How to enable raw GNSS data in u-blox NEO-M8N receivers (Firmware 2.01)

Time interval counter based on TI TDC7200 chip with GPS modules for precise time standard comparison.

Sparkfun UBX GNSS Receiver monitor utility for ESP32 and VSCode / PlatformIO

This is a project I'm working on so I can have cruise control in my car. It uses GPS in order to monitor the speed of your vehicle, and shows your speed on the OLED display. It allows you to set your desired speed limit using two push buttons. If you speed, the device screams - the pitch changing with your speeding.