170v Nixie Tube Power Supply from 5v Supply

Nick is a series of different Nixie clocks based on ESP8266.

Digital clock code for Arduino Nano and Nano 33 IoT, to drive nixie or LED matrix displays

jQuery-based tiny visual component, that makes your text look like Nixie tubes from science labs.

The Nixie Sockets were created to unify the entire family of nixie tubes. All sockets have the same pin layout which allows easy replacement of the sockets for different nixie tubes without having to any hardware change. When using the sockets with your device, sockets provides the valid power supply parameters for the compatible nixie tubes (supply voltage and current).

Schematics and code for Cloxie: my Nixie Tube Clock.

Firmware for nixie clock

Nixie Tube Driver V2 - Easy to use - only 3 control lines. Multiple drivers can be connected in series. 22 high-voltage outputs for nixie cathodes. Compatible with 5V and 3.3V (IO & VCC). Example code available for Arduino. Prepared libraries for use in your own projects - Eagle, Altium, KiCad and EasyEDA. It can successfully replace older drivers. https://www.NixieTester.com

Use your Arduino and build Nixie Clock, Thermometer and Hygrometer. Beautifully made housing and easy to operate. It’s perfect device for your desk.

Nixie Library for clock development

Nixie Tube Driver V1 - Easy to use - only 3 control lines. Multiple drivers can be connected in series. 10 high-voltage outputs for nixie cathodes. Compatible with 5V and 3.3V (IO & VCC). Example code available for Arduino. Prepared libraries for use in your own projects - Eagle, Altium, KiCad and EasyEDA. It can successfully replace older drivers such as 155ID1 or 74141 and even new ones (HV5812, HV5530 etc.).

A JavaScript clock imitating Nixie tubes.

Use your Arduino and build IoT Nixie Clock, Thermometer and Hygrometer. You can control the clock via the Arduino Cloud, you can send data to the cloud then transfer it to e.g. Google sheets and visualize (e.g. temperature or humidity). You can also use the Alexa Amazon assistant.

Software code for a Raspberry pi powered Nixie Clock

Binary Nixie Clock with 18 x IN-2 Nixie Tubes for Arduino Nano / Nano IoT 33 / Nano Every and Particle Photon.

Program for the ESP8266 chip to receive the time via SNTP regularily and output it in the NMEA protocol over the UART interface, similar to a GPS module. Use case: Synchronizing a nixie clock with network-time

Divergence Meter Software for PIC processors from Tom Titor

Nixie Shield for Arduino

A IN16/IN8 based modular nixie clock with wifi

Arduino-driven Nixie tube display for Dexcom data

Nixie Shield / Hat for Raspberry Pi

Analog spectrum analyzer using old-world IN-9 neon gas Nixie Tubes on a through-hole PCB

Arduino code for using the Arduinix Nixie shield with a GPS for time synchonisation and timer interrupts for stable tube multiplexing

A Pi Pico powered nixie tube board that uses 6 IN-14 nixie tubes.

I2C Nixie Clock

Useless Nixie Device

A tiny single nixie tube clock, for LD995a or IN-16

"People present" counter for SpaceAPI, using nixie tubes.

Firmware designed for projects with an ESP-M2 driving VFD or Nixie vacuum tubes

The ONE is a single digit Nixie Clock. With 26 interchangeable nixie tube sockets, this unique device allows you to connect most existing nixie tubes. The clock is based on Arduino Nano and allows you to connect to the Arduino IoT Cloud, control from smartphone app and even voice control via Alexa voice assistant.