C# Semtech SX127X library for .NET nanoFramework powered devices

ZumoMotors Library for the Netduino

C# Nordic Semiconductor nRF24L01 library for nanoFramework powered devices

A .NETMF v4.3 class for MCP342x : 18-Bit, Multi-Channel ΔΣ Analog-to-Digital Converter with I2C Interface and On-Board Reference

A .NETMF v4.3 class for the A3967 EasyDriver Shield Stepper Motor Driver Module

A NETMF library for the SRF08 Ultra sonic range finder.

C# Semtech SX127X/RFM9X LoRa library for .Net Micro framework powered devices

Communication library for Microchip SPI 1Mbit EEPROM with Microsoft .NET Micro Framework

A NETMF class for the MD25 - Dual 12Volt 2.8Amp H Bridge Motor Drive

A .NETMF v4.3 class for MLX90614 : Single and Dual Zone Infra Red Thermometer in TO-39 (I²C)

A NETMF library for the ELCD162 module

A NETMF library for the Digital Compass solution HMC6352

A .NETMF v4.3 class for PCF8574 : remote 8-bit I/O expander for I 2C-bus

A NETMF library for LCD 2x16 I2C (PCF2119)

Netduino NetMF client for my Windows 10 IoT Core LoRa field gateways

This Application listens on HTTP Port 8000 and alows controller hardware attached to the IoT Device via a Web Browser

A NETMF library for the TSL2561 LIGHT-TO-DIGITAL CONVERTER

Robot, walking on the freedom of direction (north, south, west, east). .NET Micro Framework & I2C Protocol are used.

A NETMF library for IHM (PCF2119 : LCD 2x16 I2C and PCF8574 : remote 8-bit I/O expander for I 2C-bus)

A .NETMF v4.3 class for the TMP102 : Low-Power Digital Temperature Sensor With SMBus™ and Two-Wire Serial Pages

Netduino MCP3424 ADC chip demo for ADC Pi V2 boards

Access to TFT LCD display chip Solomon SSD1960 using NetDuino (Parked old project from 2013)

IoT Starter Netduino Plus 2 Thing

The firmware development of intelliPWR

Home Intelligence with Netduino

Microcontroller fun

Sample Netduino V2/V3 client for my nRF24L01 field gateway projects

A .NET micro framework application which can be run on a NetDuino. Via an public endpoint in teh connected local network it is possible to control the power switch, for example of a coffee machine, remotly over WiFi. Basicly any relay can be controlled, which is connected to the microcontroller.

Source code for a simple, portable, microcontroller-based navigation device

.NET MicroFramewrok - FezPanda