LoRa and LoRaWAN crates for End Devices

LMIC-node | One example to rule them all. LMIC-node is an example LoRaWAN application for a node that can be used with The Things Network. It demonstrates how to send uplink messages, how to receive downlink messages, how to implement a downlink command and it provides useful status information. With LMIC-node it is easy to get a working node quickly up and running. LMIC-node supports many popular (LoRa) development boards out of the box. It uses the Arduino framework, the LMIC LoRaWAN library and PlatformIO.

Enable LoRaWAN communications on your Raspberry Pi Pico or any RP2040 based board. 📡

Quickly get started with AWS IoT Core for LoRaWAN with sample solutions (binary decoding, device and gateway monitoring, downlink, dashboarding, provisioning automation)

SenseCAP Indicator SDK.

Parsers for LoRaWAN Sensors on ELEMENT-IoT

This is a device (mote) emulator for LoRaWAN protocol(1.0 & 1.1). Completely realized by Python 3.6

Example payload decoders

LoRaWAN / LoRa P2P library for ESP32 MCUs and the RAK3172 LoRa SoM.

STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip

Open LoRaWAN modem for Murata Type ABZ

Basic MAC

FramI2C is an Arduino library for FRAM (F-FRAM, Ferroelectric RAM) non-volatile memory chips with I2C interface. Supports most common Cypress and Fujitsu I2C FRAM chips with densities of 4, 16, 64, 128, 256, 512, and 1024 kilobits (kb). Provides simple, easy to use read() and write() methods for reading/writing integral and floating point types (uses automatic type inference and byte conversion), readBytes() and writeBytes() for reading/writing larger amounts of data as byte array, and fill() to fill or clear a range of FRAM memory.

Uniwersalna platforma sprzętowa na warsztaty i do prototypowania

Allows for streamlined use of the Semtech sx1280 LoRa Radio over SPI in the Arduino IDE

Useful resources for Cosmic LoRa Aurora https://www.tokopedia.com/cosmic-iot/lora-esp32-esp-32-arduino-915-mhz-915mhz-antenna-lipo-charger-lora-aurora-v2

Hardware design of a solar-powered LoRaWAN node based on ESP32

neOCampus Arduino | home of the neOSensors end-devices

Read weight values from popular different loadcell ADCs: HX711, ADS1232, and ADS1220, then transmit via LoRaWAN network.

Rain gauge connected via Lora Wan

This water tank meter, calculates the distance from the sensor to the corresponding level of water inside the tank, sends it off with lora protocols to The Things Network. Once it is in TTN we can retrieve the data into a database or application of your own creation.

A C# library for LoRaWAN connectivity for RAKwireless RAK3172 Module equipped .NET nanoFramework powered devices.

An ESP32-based lighting control system for campervans (or anything else)

C# RAK3172 LoRaWAN library for .NET Core powered devices

C# Seeeduino LoRa-E5 LoRaWAN library for .Net Core powered devices

Pacote de instalação automática do Packet forwarder para Raspbian

C# RAK 811 LoRaWAN library for nanoFramework powered devices

JAVA | Payload utils (Encoder/Decoder) for Milesight UC300 IoT Controller for LoRaWAN® Version.

This sample PlatformIO project sends every minute 'Hello LoRa Fcnt=nnn' via LoRaWAN to TheThingsNetwork. It is a test code for TTNv3

C# RAK4200 LoRaWAN library for .Net nanoFramework powered devices