Implementation of I2C-bus written in Golang. Forked from davecheney/i2c.

micrOS - mini asynchronous automation OS for DIY projects.

This is an Arduino library for Aosong ASAIR AHT1x, AHT2x Digital Humidity & Temperature Sensor

This is an Arduino library for HTU21D, Si7021 and SHT21 Digital Humidity & Temperature Sensor

Software-based I2C communication library for Arduino

Arduino Lib for AMS AS5048B I2C - 14-bit magnetic rotary position sensor

Commandline program for reading a Bosch BNO055 IMU sensor over I2C under Linux

A ROS2 package that interfaces with an MPU6050 sensor over I2C.

This is an Arduino library for Aosong ASAIR AHT10, AHT15 Digital Humidity & Temperature Sensor

Golang library to interact with Bosch Sensortec BMP180/BMP280/BME280/BMP388 temperature, pressure and humidity sensors via I2C-bus from Raspberry PI.

ESP32 ESP-IDF Components (I2C, 1-wire, SPI, ADC, etc.) GUVA-S12SD AHTXX AK8975 AS7341 BH1750FVI BME680 BMP280 BMP390 CCS811 ENS160 HDC1080 HMC5883L LTR390UV MMC56X3 MPU6050 SGP4X SHT4X SSD1306 TLV493D VEML7700 DS18B20 MAX31865

C++ Interface for the Bosch-Sensortec's BNO055 compatible with Espressif's ESP32 SoC running esp-idf.

Deprecated - Nodejs C++ plugin, allowing to easily read data from raspberryPi's sensors.

Use TwoWire to Create Custom I2C Bus on an AI-Thinker ESP32Cam & Interface I2C Sensors (BME280).

Standalone I2C driver for AHT20 sensor written in Python

A quick and dirty re-purposing of adafruit circuitpython library for MLX90640 IR sensor so that it can be read using micropython (e.g. pycom's wipy 3.0)

Commandline program for reading a Hillcrest Labs Bosch BNO080 IMU sensor over I2C under Linux

MLAB hardware modules and building blocks

Qt implementation of I2C protocol for RaspberryPi along with some i2c sensors, in particular: TOF10120, VL53l1X, VL6180X, MPU6050, QMC5883L, TCA9548A, PCA9685

This is an Arduino library for the Bosch BMP085 & BMP180 barometric pressure & tempemperature sensor

A simple mobile phone built with the Raspberry Pi Pico

ARM I2C Drivers for various components (requires 'sarmfsw' & 'HARMcksL')

Golang library to interact with ST VL53L0X time-of-flight ranging sensor via I2C-bus from Raspberry PI.

An arduino project to allow the connection of Wii accessories as USB HID game controller devices using UnoJoy and Wire (I2C). Nunchucks and arcade sticks are supported and tested, classic game controller support is untested. Update rate is approximately 100Hz.

A simple driver for ESP8266 enthusiasts out there to drive MCP23017 16-bit IO Expander

Hardware sensor interfaces through GPIO, I2C & SPI including BME280, TSL2561, ENER314, RFM69

Library for interfacing with MLAB modules in Python

This library interfaces with the Texas Instruments BQ27441 Battery Fuel Gauge using i2c

arduino library to use the DS2482 I2C to one-wire bridge chip to enable I2C access to the one-wire bus.

I2C address translator module, allows connection of multiple I2C devices with the same address to one bus.