Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

WT32-ETH01 LAN 8720 RJ45 wired Wireless-tag

Smogly(formerly: Smogomierz) - simple and cheap PM 2.5 and PM10 sensor based on NodeMCU (ESP8266) or ESP32

ESPHome configuration for a DIY indoor air quality monitor for CO₂ concentration, PM2.5 and PM10 concentrations, and temperature, humidity and pressure

Apache Mynewt Sensor Network Application for STM32 Blue Pill and nRF52 with Visual Rust, NB-IoT, GPS, iBeacon, NimBLE, ESP8266 (WiFi Geolocation) and nRF24L01

Drivety: Smart App Assistant to Secure Inside Car Activity. #AndroidDevChallenge

MicroPython MQTT & code example for Eduponics mini ESP32 learning kit

Go·Hardware·Lean - Host drivers

A platform agnostic Rust driver for the Bosch BM[PE]-280

No description provided.

Sensirion SPS30 driver for ESP32, MEGA2560, UNO,UNO-R4 ESP8266, Particle-photon, UNOR4, UNOQ on UART OR I2C coummunication

Wi-Fi sensor based on XIAO ESP32-C6

esp8266 IoT to mqtt bridge. Eastron SDM220, SDM230, SDM630 modbus; AZ7798; SenseAir s8; BME280; HDC1080; Plantower PMS5003, PMS7003, PMSA003

GPS IoT tracker board for scanning gps and environment information and sending this to a MQTT server via GPRS.

Yet another esp32 watch

Arduino-compatible MCU firmware code for sensor-, telemetry-, and gateway-appliances.

A low power LoRaWAN Node

Sample code for reading values from a BME280 temperature-humidity-pressure sensor, via ESP-IDF's I2C master driver, supports both normal mode and forced mode described in the datasheet. https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf

BMP280 and BME280 I2C driver for ESP32 boards using the IDF toolchain.

Smarthome for Caravans and Motor Homes - System for measuring and displaying various values in caravans and motor homes, including climate values, fill levels and leveling data, energy data, propane/butane sensor. incl. display, config website, test routines, etc. Own circuit board created

💧 Arduino library for Bosch Sensortec BME280 – combined temperature, pressure, humidity sensor. The library allows using the sensor over I2C or SPI on any board that supports Arduino.

ESP8266 and BME280 sensor for a minimalist weather station to put on your terrace

weather station, arduino esp8266, st7920, mh-z19, BME-280

ESP8266 + BME280 -> MQTT, Serial, HTTP-Server, HTTP-Client/Volkszähler

A simple Prometheus exporter for metrics from Bosch BME280 sensors for ESP8266 based boards with NodeMCU firmware.

Low Power WIFI weather stations and environmental data loggers based on ESP8266/ESP8285 Module

Battery/solar-powered ESP32 TTN (LoraWAN) sensor for measuring temperature, humidity, air pressure and fine dust.

IoT program for Arduino Uno / STM32 Blue Pill (libopencm3) that reads BME280 temperature + humidity + altitude sensors, via I2C or SPI with DMA and multitasking. Sends sensor data to Sigfox via Wisol Sigfox module on UART. Runs on cocoOS task scheduling library http://www.cocoos.net

Turta IoT HAT Source, Reference and Manual.

Use TwoWire to Create Custom I2C Bus on an AI-Thinker ESP32Cam & Interface I2C Sensors (BME280).