57 results for “topic:bldc-motor-controller”
Arduino FOC for BLDC and Stepper motors - Arduino Based Field Oriented Control Algorithm Library
Arduino Shiled for running Gimbal BLDC motors with FOC algorithm
BLDC motor control firmware for 32-bit ESCs
Sapog - advanced multiplatform ESC firmware
基于STM32的项目代码和电路原理图
Small package, low-cost BLDC diver board fully compatible with the simplefoc library
The Janus Controller is a Brushless motor driver with an on-board magnetic encoder, a three-phase MOSFET driver, three MOSFET half-bridges, a temperature sensor and current sensing resistors.
A powerful Arduino shield for running BLDC motors using the FOC algorithm
This repository contains the MATLAB/Simulink source code to reproduce the experiments presented in the book: "Introduction to Microcontroller Programming for Power Electronics Control Applications"
Custom PCB design and firmware, which serve as a ESC or BLDC controller, to drive brushless BLDC motors using my own control algorithms.
BLDC Motor Controller based on the VESC 4.12 hardware
An open-source ESC project for controlling BLDC motors with open-loop and BEMF-based feedback control.
Miniature closed-loop controller for brushless DC motors
Servo inverter for 3-phase AC motor with/out encoder feedback
低成本（RMB 7元左右）12V的bldc驱动电路。基于STC15W401AS单片机。
A library for Arduino boards that reads angles from AS5047 and AS5147 sensors. Also handles encoder configuration.
Design of Optimal PID Controller for the Speed Control of DC Motor by Using Artificial Neural Network.
电子调速器
Sensorless brushless motor controller using PIC18F1230 (XC8)
Aotenjo One firmware
PID control of a BLDC motor using an STM32F4 Discovery Board
Arduino code for the STEVAL-GMBL02V1 BLDC motorcontroller, using SimpleFOC to modulate the motors
...some Quadrocopter Flight Controller - ESP32 Project
Zubax Orel BLDC motor controller
Control software for differente kind of brushless motors: PMSM, BLDCM, AICM.
BLDC Controller using STM32 Nucleo board and X-NUCLEO-IHM08M1
Sensorless driver of BLDC and PMSM motors based on DRV10987 controller.
Easy to use Arduino library to control virtually any DC/stepper motor
Brushless DC motor driver based on AVR µC - part of KDcopter project.
My first Sensored BLDC Trapezoidal control firmware developed between 2018-2019. Currently going to be archived soon.