utkarshad21/Verilog-HDL-Codes

Verilog-HDL

This repository contains a collection of Verilog HDL designs covering fundamental digital circuits, sequential logic, and basic protocol-level implementations. Each module is accompanied by a testbench for functional verification.

• Modules Included

1. Twin 8-bit Register

• Stores two independent 8-bit inputs into two output registers.
• Synchronous operation with clock.
• Includes reset functionality to clear both registers.
• Useful for parallel data storage and pipelining applications.

2. APB Protocol Controller

• Implements Advanced Peripheral Bus (APB) protocol.
• Follows FSM-based design: IDLE - SETUP - ACCESS.
• Supports 32-bit address and data transactions.
• Includes internal memory for read/write operations.
• Demonstrates basic AMBA protocol communication.

3. Clock Divider (Divide by 4)

• Reduces input clock frequency by a factor of 4.
• Implemented using sequential flip-flop stages.
• Useful for clock management in digital systems.

4. Up/Down Counter with Load

• 8-bit counter supporting increment and decrement operations.
• Includes synchronous load feature for initializing count.
• Reset functionality available.
• Commonly used in timers and control logic.

5. Multi-Drop Bus System

• Shared 8-bit data bus connected to multiple registers.
• Controlled using enable signals to select destination register.
• Demonstrates bus-based communication.
• Useful in memory-mapped and processor interfacing systems.

6. RGB Sequence Controller (FSM)

• Implements a traffic light controller using FSM.
• Cycles through Green - Yellow - Red states.
• Demonstrates state transition logic.
• Useful for learning finite state machine design.

7. Universal Shift Register

• 5-bit register supporting multiple operations:
  • Hold
  • Shift Left
  • Shift Right
  • Parallel Load
• Provides both serial and parallel outputs.
• Widely used in communication and data processing systems.