ogn-alert

This python module can be used to trigger alerts and actions based on geofenced and filtered data of the Open Glider Network (OGN).
Actions for sending HTTP requests and for triggering a GPIO pin on a Raspberry Pi are provided.
Custom actions can easily be added, see ogn_alert/actions.py for implementation details.
OGN data is obtained either from the web (via the APRS servers or the API of https://live.glidernet.org) or directly from the data stream of a local OGN receiver.

Install

You need the following libraries, which can be installed individually with pip install <library>.
Install all with pip install -r requirements.txt.

• ogn-client
• shapely
• RPi.GPIO (optional, if using TriggerGPIOAction)

You can install the module itself with pip install -e . system-wide, although this is not required if the run script is located in this directory.

Configure

Write your own main.py script to configure and run ogn-alert.
Refer to the provided template for further instructions.

Note that there are multiple options to subscribe to OGN data.
If you run this module directly on an OGN receiver, TelnetHandler can be used to analyze the OGN data stream locally.
To use OGN data from the web, select either AprsHandler with a suitable aprs_filter (e.g. "r/<lat>/<lon>/<distance>") or GlidernetBackendHandler with some latitude and longitude bounds.

Automate

To automatically start ogn-alert on boot, set up a systemd service using the template ogn-alert.service.
Edit this file and make sure that ExecStart points to your main.py script.
You might also want to change other options, e.g. when and how the script is restarted if a failure occurs.
Then, enable and start the service as follows:

$ sudo cp ogn-alert.service /etc/systemd/system/
$ sudo systemctl enable --now ogn-alert

Check if ogn-alert is running:

$ systemctl status ogn-alert

If you change main.py, the service has to be restarted with sudo systemctl restart ogn-alert.