desantir/DMXStudio

DMXStudio DMX Controller

See details in the wiki https://github.com/desantir/DMXStudio/wiki

Target environment:

• Tested with Windows 10 32 bit

Build Environment:

• Microsoft Visual Studio 2015 or 17

To use this you will need one or more of the following:

• Enttac USB PRO comatible USB to DMX adapter (such as DMXking ultraDMX Micro -> http://dmxking.com/usbdmx/ultradmxmicro)

or

• Build your own simple USB-based DMX hardware controller based on the FTDI chip (about $20):

  • FTDI Basic Breakout - 5V http://www.amazon.com/gp/product/B0068QKQEA/
    https://www.amazon.com/Sparkfun-Electronics-4446819-FTDI-Cable/dp/B00DJBNDHE (alternate)
  • TI SN75176BP http://www.mouser.com/ProductDetail/Texas-Instruments/SN75176BP/
  • Micro USB to USB B cable http://www.amazon.com/gp/product/B001TH7GUK/
  • 1x3" breadboard http://www.amazon.com/gp/product/B0040Z6OK6
  • XLR connector
  • 1 100 Ohm resistor
  • Project box (optional) http://www.radioshack.com/product/index.jsp?productId=2062280
  • Wire / soider /etc

• The FTDI LIB & DLL from FTDI Corp. http://www.ftdichip.com/Drivers/D2XX.htm

• DMX controllable fixture(s) and DMX channel descriptions