BW16-SmartDeauther

Deauth networks using BW16 (RTL8720DN). Deauth+Dissoc+CTS

More smart deauth attck then normal

Hardware Requirements

• Ai-Thinker BW16 RTL8720DN Development Board

Setup

1. Download Arduino IDE from here according to your Operating System.

2. Install it.

3. Go to File → Preferences → Additional Boards Manager URLs.

4. Paste the following link :

   https://github.com/ambiot/ambd_arduino/raw/master/Arduino_package/package_realtek_amebad_index.json
   

5. Click on OK.

6. Go to Tools → Board → Board Manager.

7. Search Realtek Ameba Boards (32-Bits ARM Cortex-M33@200MHz) by Realtek.
   
   !!! CODE WORK WITH 3.1.7 pack, other versions may not be work !!!

8. Install it.

9. Restart the Arduino IDE.

10. Done!

Install

1. Download or Clone the Repository.
2. Open the folder and open SmartDeauth.ino in Arduino IDE.
3. Select board from the Tools → Board → AmebaD ARM (32-bits) Boards.
   • It is Ai-Thinker BW16 (RTL8720DN).
4. Select the port of that board.
5. Go to Tools → Board → Auto Flash Mode and select Enable.
6. Upload the code.
   • Open Serial Monitor (115200) and write "scan", than write "attck [num]" ot "mattck [num]"

Note

Tested only on provider none smart routers

Code for educational purposes, good luck